Mantall Electric 4WD Scissor Lift. Introducing the XE80W with levelling legs. 
Mantall rigid adherence to safe and tested standards of aerial work platforms.

Our products are certified to AS1418.10.

Standard Features:

•Four wheel drive
•Excellent climbing ability (40%+)
•Self levelling legs
•Heavy lift (550kg)
•8m working height
•Non marking wide profile tyres
•High ground clearance (150mm)
•Battery powered
•Wind rated

MULTITASK

Working height(m)

8

Platform height(m) 6
Minimum platform height(m) 1.69
Maximum extension(m) 1
Lifting capacity(kg) 550
 Lifting on extension(kg) 120
Operating weight(kg) 2200
Platform dimension(m) 2.3x1.5
Maximum leg extension(m) 0.17
Storage dimension(m) 2.5x1.72
 Storage height(m) 2.25
Storage height folded(m) 1.56
Gradeability(%) 40
Ground clearance(m) 0.15
Inside turning radius(m) 0

Outside turning radius(m)

2.4
Lift and lower times(s) 32/30
High speed(km/h) 3.4
Safety speed(km/h) 0.7
Batteries 4x6v/225 a/h
Tyre size 406x152
   

SCISSOR LIFTS are used for application where more workspace and more lifting capacity are required. They are designed to provide larger platform work areas and generally allow for heavier loads than boom lifts. Scissor lifts may be manoeuvred in a manner similar to boom lifts, but the platform may be used only vertically, except for standard roll-out deck extensions that extend horizontally.

We have scissor lifts available in various widths and platform heights. Electric scissors are best suited to working on smooth and level surfaces such as concrete floors.

JLG 1930

SPECIFICATIONS

Platform Height

5.72 m

Working Height

7.72 m

Stowed Height

1.98 m

Stowed Height Folded

n/a

Stowed Width

0.76 m

Stowed Length

1.87 m

Platform Size

1.70 m x 0.76 m

Platform Extension

2.60 m

Platform Capacity

227 kg

Weight

1,550 kg

Mantall Electric Self-propelled Scissor Lift to provide you with a flexible mobility, operability. It is unique in carrying capacity and a wide platform that can bring more workers and tool set. Whether indoors or outdoors, can be easily used
Mantall rigid adherence to manufactory, safe and test standards of the aerial work platforms.

Our products are certified to AS1418.10.

Standard Features:

.XE-W series working height is from 8m (about 26 feet and 14m)(about 46 feet).
.The platform can outreach 1m.
.XE-W series can be easily passed double standard door, large lift capacity, min. lift capacity is 350kg, max. lift capacity is 550kg.
.Proportional controls for lift and drive functions.
.Automatic 25 Amp battery charger provides strong power for vehicle.
.Safe distance protection when the platform lowering down.(CE)
.Manual Emergency platform lowering valve, when there is no power, the machine can be safety lower down.
.Emergency stop at both platform and ground controls.
.Drive speed interlock limits speed while elevated.
.Multiple disc brakes provide smooth deceleration.
.When there is no power, manual brake release function can move the machines under the circumstances when there is no other forklift, lifting equipment and so on…
.Pothole guards protect the machine don’t tilting down when the machine moved on the raised position.
.Non-marking tires make sure there is no damage and no marks on the ground.
.AC wiring to platform
.Tilt level sensor with an audible alarm
.Beeper horn
.Hour meter
.Safety brackets
.Battery charge indicator
.Forklift pockets
.Diagnosis system
.Extended platform

Options Features:

.Motion alarm
.Platform swing gate
.Air line to platform
.Dual flashing beacon
.Maintenance-free battery
.Horn
.Platform
.Foldable platform
.Key-type lock sliding door
.Anti-collision system
.Top limit protection auto-stop device

XE100W

SPECIFICATIONS

 

Working height max(m)

10

Platform height max(m)

8

Outreach(m)

1

Lifting capacity(kg)

450

Lifting capacity(kg)(Extended platform) 120

Weight(kg)ANSI/CSA Standard

2040

CE/AUS Standard

2520

Platform size(L×W×H)m

2.3×1.15×1.1

The length of platform extended(m)

3.2

Skirting board height(m)

0.172

Stowed size(L×W)m

2.4x1.2

Stowed height(m) Fixed Platform 1.98
Stowed height(m) 2.25
Height of the machine with platform folded(m) 1.69
Wheelbase(m) 1.85
Length of the machine with platform extended(m)

 

3.5

Hydraulic tank capacity(L) 15 
Gradeability 30% 
Ground clearance(m) 0.1
 Pothole protection board ground clearance(m)(down) 0.019
Inside rotation radius(m)
Outside turning radius(m) 2.3
Load number max
Raised time/Lowering time(s) 45/30

Traction speed(km/h)

3.4
Safe speed(km/h)  0.7 
Vertical tilt° ANSI CSA 3
                  CE/AUS
Lateral tilt°ANSI CSA 2
                  CE/AUS 1.5 
Power source 4X6V ; 225Ah
Tire size(mm) 406X127X318
Drive Model Hydraulic Drive / Electric Drive

SCISSOR LIFTS are used for application where more workspace and more lifting capacity are required. They are designed to provide larger platform work areas and generally allow for heavier loads than boom lifts. Scissor lifts may be manoeuvred in a manner similar to boom lifts, but the platform may be used only vertically, except for standard roll-out deck extensions that extend horizontally.

We have scissor lifts available in various widths and platform heights. Electric scissors are best suited to working on smooth and level surfaces such as concrete floors.

JLG 3246

SPECIFICATIONS

 

Platform Height

9.68 m

Working Height

11.68 m

Stowed Height

2.36 m

Stowed Height Folded

1.97 m

Stowed Width

1.17 m

Stowed Length

2.50 m

Platform Size

2.50 m x 1.12 m

Platform Extension

4.47 m

Platform Capacity

454 kg

Weight

2,810 kg

Mantall Electric Self-propelled Scissor Lift to provide you with a flexible mobility, operability. It is unique in carrying capacity and a wide platform that can bring more workers and tool set. Whether indoors or outdoors, can be easily used
Mantall rigid adherence to manufactory, safe and test standards of the aerial work platforms.

Our products are certified to AS1418.10.

Standard Features:

.XE-W series working height is from 8m (about 26 feet and 14m)(about 46 feet).
.The platform can outreach 1m.
.XE-W series can be easily passed double standard door, large lift capacity, min. lift capacity is 350kg, max. lift capacity is 550kg.
.Proportional controls for lift and drive functions.
.Automatic 25 Amp battery charger provides strong power for vehicle.
.Safe distance protection when the platform lowering down.(CE)
.Manual Emergency platform lowering valve, when there is no power, the machine can be safety lower down.
.Emergency stop at both platform and ground controls.
.Drive speed interlock limits speed while elevated.
.Multiple disc brakes provide smooth deceleration.
.When there is no power, manual brake release function can move the machines under the circumstances when there is no other forklift, lifting equipment and so on…
.Pothole guards protect the machine don’t tilting down when the machine moved on the raised position.
.Non-marking tires make sure there is no damage and no marks on the ground.
.AC wiring to platform
.Tilt level sensor with an audible alarm
.Beeper horn
.Hour meter
.Safety brackets
.Battery charge indicator
.Forklift pockets
.Diagnosis system
.Extended platform

Options Features:

.Motion alarm
.Platform swing gate
.Air line to platform
.Dual flashing beacon
.Maintenance-free battery
.Horn
.Platform
.Foldable platform
.Key-type lock sliding door
.Anti-collision system
.Top limit protection auto-stop device

XE120W

SPECIFICATIONS

 

Working height max(m)

12

Platform height max(m)

10

Outreach(m)

1

Lifting capacity(kg)

350

Lifting capacity(kg)(Extended platform) 120

Weight(kg)ANSI/CSA Standard

2450

CE/AUS Standard

2950

Platform size(L×W×H)m

2.3×1.15×1.1

The length of platform extended(m)

3.2

Skirting board height(m)

0.172

Stowed size(L×W)m

2.4x0.8

Stowed height(m) Fixed Platform 1.98
Stowed height(m) 2.38
Height of the machine with platform folded(m) 182
Wheelbase(m) 1.85
Length of the machine with platform extended(m)

3.5

Hydraulic tank capacity(L) 25 
Gradeability 25% 
Ground clearance(m) 0.1
 Pothole protection board ground clearance(m)(down) 0.019
Inside rotation radius(m)
Outside turning radius(m) 2.3
Load number max
Raised time/Lowering time(s) 55/37

Traction speed(km/h)

3.4
Safe speed(km/h)  0.7 
Vertical tilt° ANSI CSA 3
                  CE/AUS
Lateral tilt°ANSI CSA 2
                  CE/AUS 1.5 
Power source 4X6V ; 225Ah
Tire size(mm) 406X127X318
Drive Model Hydraulic Drive / Electric Drive

More Articles ...